Modular drills with interchangeable carbide heads
Interchangeable drill heads and carbide modular drills for 3×D and 5×D depths, Ø14.0–30.0 mm.
Galtona's Modular Drills range is an indexable spade drilling system (DSCD series) covering Ø14.0 mm to Ø30.0 mm in both 3xD and 5xD depths.
A single interchangeable spade insert (Spade.GTPP450), clamped via a Torx Plus screw, is shared across both depth ranges at each diameter — reducing tool-change time by up to 20% and supporting high feed rates up to 0.5 mm/rev in steel.
Suitable for stack drilling, drilling into solid material, and drilling on inclined surfaces, with grade options spanning steel (GTPP425/GTPP450), stainless and heat-resistant alloys (GTPP440), and cast iron (GTPK415).
Indexable spade drill with interchangeable insert
Spade Drill System — Overview
Indexable spade drilling, Ø14.0–30.0mm, available in 3xD and 5xD depths.
Galtona's Modular Drills range is an indexable spade drill system (DSCD series) covering Ø14.0mm to Ø30.0mm in both 3xD and 5xD depths, with an interchangeable insert (Spade.GTPP450) clamped via a Torx Plus screw. The system is built around a single, precise insert seat — the same insert dimensions and clamping-screw sizes are shared across both depth ranges at each diameter.
Your benefits
- Easy handling
- Increased productivity thanks to the interchangeable insert
- Precise and stable insert seat, clamping via Torx Plus screw
Cost savings
- Sustainable and economical
- Reduces tool-change time by up to 20%
- High feed possibility up to 0.5 mm/rev in steel