HD8 Chip Groove

Name: Galtona
Address: Felspar Road, Amington Industrial Estate, Tamworth, B77 4DP, GB
Telephone: +44-121-769-1787

Heaviest chip groove in the range — steel "P25", also rated for interrupted cuts.

Example: CNMM 190616SN-HD8. Depth of cut 2.50–12.00 mm, feed 1.20–0.35 mm. Suited to consistent, inconsistent, and interrupted cutting depth.

Swipe to see more →

Designation	Chipbreaker	Material No.	Available
CNMM 190616SN-HD8 GTCP125	…-HD8	MM11840034	●
CNMM 190624SN-HD8 GTCP125	…-HD8	MM11840035	●
CNMM 250924SN-HD8 GTCP125	…-HD8	MM11840038	●
CNMM 250932SN-HD8 GTCP125	…-HD8	MM11840039	●
SNMM 190616SN-HD8 GTCP125	…-HD8	MM11840043	●
SNMM 190624SN-HD8 GTCP125	…-HD8	MM11840044	●
SNMM 250924SN-HD8 GTCP125	…-HD8	MM11840047	●
SNMM 250932SN-HD8 GTCP125	…-HD8	MM11840048	●

Cutting data — general cutting parameters by workpiece material

Swipe to see more →

Group	Type / alloy	Hardness HB	GTCP115 vc	GTCP125 vc	GTCP135 vc
P	Non-alloyed steel 0–0.45% C	150–250	220–400	170–240	170–190
P	Low-alloyed steel	250–300	200–320	100–190	90–150
P	High-alloyed steel	200	180–320	130–210	120–200
P	Corrosion-resistant steel	200	200–320	130–210	140–180
M	Ferritic stainless	200	220–320	140–210	140–200
M	Austenitic stainless	180	–	100–210	110–190
M	Duplex stainless	230–260	–	–	80–150
M	Martensitic stainless	330	–	70–100	55–75
K	Grey cast iron	180	140–370	130–210	–
K	Spheroidal cast iron	160	190–430	120–240	–
K	Malleable/tempered iron	130	180–520	150–250	–