Indexable Drills — Full Specifications
IDCD.3D — 3×D Indexable Drills
Ø14.0–44.0 mm, right-hand cutting, SOLT indexable insert, available in fine 0.5 mm increments.
Example designation: IDCD.3D.1400.R.20.05 — 14.0 mm cutting diameter, right-hand, 20 mm shank × 50 mm insert size code. Shank diameter and body length increase in steps as bore diameter increases.
Representative sizes across the range — full range available in 0.5 mm increments from 14.0 to 44.0 mm
Swipe to see more →
| Ø [mm] | Designation | Ø d×l [mm] | N [mm] | L [mm] | Material No. |
|---|---|---|---|---|---|
| 14.0 | IDCD.3D.1400.R.20.05 | 20×50 | 42 | 55 | MM12547000 |
| 16.5 | IDCD.3D.1650.R.20.05 | 20×50 | 51 | 68 | MM12547045 |
| 17.0 | IDCD.3D.1700.R.20.06 | 20×50 | 51 | 68 | MM1254922 |
| 19.5 | IDCD.3D.1950.R.25.06 | 25×56 | 60 | 78 | MM1254914 |
| 20.0 | IDCD.3D.2000.R.25.07 | 25×56 | 60 | 78 | MM12553501 |
| 23.0 | IDCD.3D.2300.R.25.07 | 25×56 | 69 | 89 | MM12553508 |
| 23.5 | IDCD.3D.2350.R.32.08 | 32×60 | 72 | 92 | MM12553510 |
| 28.0 | IDCD.3D.2800.R.32.08 | 32×60 | 84 | 106 | MM12553521 |
| 28.5 | IDCD.3D.2850.R.32.10 | 32×60 | 87 | 110 | MM12553522 |
| 30.0 | IDCD.3D.3000.R.32.10 | 32×60 | 90 | 113 | MM12553525 |
| 30.5 | IDCD.3D.3050.R.40.10 | 40×68 | 93 | 117 | MM12553534 |
| 33.0 | IDCD.3D.3300.R.40.10 | 40×68 | 99 | 124 | MM12553539 |
| 33.5 | IDCD.3D.3350.R.40.11 | 40×68 | 102 | 127 | MM12555817 |
| 38.0 | IDCD.3D.3800.R.40.11 | 40×68 | 114 | 141 | MM12555832 |
| 38.5 | IDCD.3D.3850.R.40.13 | 40×68 | 117 | 145 | MM12555833 |
| 44.0 | IDCD.3D.4400.R.40.13 | 40×68 | 132 | 162 | MM12555847 |
IDCD.4D — 4×D Indexable Drills
Ø14.0–44.0 mm, right-hand cutting, SOLT indexable insert, available in fine 0.5 mm increments.
Example designation: IDCD.4D.1400.R.20.05. Same diameter/shank breakpoints as the 3×D range, with longer overall body (N) and total (L) lengths for deeper holes.
Representative sizes across the range — full range available in 0.5 mm increments from 14.0 to 44.0 mm
Swipe to see more →
| Ø [mm] | Designation | Ø d×l [mm] | N [mm] | L [mm] | Material No. |
|---|---|---|---|---|---|
| 14.0 | IDCD.4D.1400.R.20.05 | 20×50 | 56 | 69 | MM12556124 |
| 16.5 | IDCD.4D.1650.R.20.05 | 20×50 | 68 | 85 | MM12556151 |
| 28.5 | IDCD.4D.2850.R.32.10 | 32×60 | 116 | 139 | MM12556883 |
| 33.0 | IDCD.4D.3300.R.40.10 | 40×68 | 132 | 157 | MM12556905 |
| 38.5 | IDCD.4D.3850.R.40.13 | 40×68 | 156 | 184 | MM12557462 |
| 44.0 | IDCD.4D.4400.R.40.13 | 40×68 | 176 | 206 | MM12557492 |
IDCD.5D — 5×D Indexable Drills
Ø14.0–44.0 mm, right-hand cutting, SOLT indexable insert, available in fine 0.5 mm increments.
Example designation: IDCD.5D.1400.R.20.05. The deepest-hole option in the range, sharing the same diameter/shank breakpoints as 3×D and 4×D.
Representative sizes across the range — full range available in 0.5 mm increments from 14.0 to 44.0 mm
Swipe to see more →
| Ø [mm] | Designation | Ø d×l [mm] | N [mm] | L [mm] | Material No. |
|---|---|---|---|---|---|
| 14.0 | IDCD.5D.1400.R.20.05 | 20×50 | 70 | 83 | MM12568585 |
| 16.5 | IDCD.5D.1650.R.20.05 | 20×50 | 85 | 102 | MM12568599 |
| 38.5 | IDCD.5D.3850.R.40.13 | 40×68 | 195 | 223 | MM12568848 |
| 44.0 | IDCD.5D.4400.R.40.13 | 40×68 | 220 | 250 | MM12568882 |
SOLT Inserts, Grades & Cutting Data
Insert range by drill diameter, coating grades, and recommended cutting parameters.
All three drill lengths (3×D, 4×D, 5×D) share the same SOLT indexable insert across seven pocket sizes, selected by drill diameter via the insert-circle (IC) size below. Each pocket size is available in four chip-groove/grade combinations: …-HCD (GTPP425, steel), …-CCD (GTPK415, cast iron), …-SCD (GTPP440, stainless), and …-HCD (GTPP440, super alloys).
Insert size by drill diameter
Swipe to see more →
| Drill Ø range [mm] | Insert | IC [mm] | Corner radius [mm] |
|---|---|---|---|
| 14.0 – 16.50 | SOLT 050204 | 5.0 | 0.4 |
| 16.60 – 19.50 | SOLT 06T206 | 5.8 | 0.6 |
| 19.60 – 23.00 | SOLT 070308 | 6.9 | 0.8 |
| 23.10 – 28.00 | SOLT 080308 | 8.4 | 0.8 |
| 28.10 – 33.00 | SOLT 10T308 | 10.3 | 0.8 |
| 33.10 – 38.00 | SOLT 110408 | 11.1 | 0.8 |
| 38.10 – 44.00 | SOLT 130508 | 13.3 | 0.8 |
SOLT insert designations by pocket size (all four grades available for each)
Swipe to see more →
| Insert | …-HCD (P) GTPP425 | …-CCD (K) GTPK415 | …-SCD (M) GTPP440 | …-HCD (S) GTPP440 |
|---|---|---|---|---|
| SOLT 050204 | MM12421657 | MM12421662 | MM12421661 | MM12421660 |
| SOLT 06T206 | MM12421690 | MM12421699 | MM12421695 | MM12421693 |
| SOLT 070308 | MM12421701 | MM12421711 | MM12421704 | MM12421702 |
| SOLT 080308 | MM12421717 | MM12421752 | MM12421750 | MM12421720 |
| SOLT 10T308 | MM12421756 | MM12421772 | MM12421771 | MM12421757 |
| SOLT 110408 | MM12421773 | MM12421777 | MM12421776 | MM12421775 |
| SOLT 130508 | MM12421779 | MM12421783 | MM12421782 | MM12421780 |
Grade overview
Swipe to see more →
| Grade | ISO | Composition | Hardness | Coating | Recommended for |
|---|---|---|---|---|---|
| GTPP425 | HC-P25 / HC-M25 | Co 9.0%, mixed carbides 4.0%, WC balance, fine/medium grain | HV30 1510 | PVD TiAlN/TiN | Steel machining |
| GTPP440 | HC-M40 / HC-P40 | Co 9.0%, mixed carbides 1.4%, WC balance, submicron grain | HV30 1590 | PVD TiAlN | Austenitic steels and heat-resistant alloys |
| GTPK415 | HC-K15 | Co 6.0%, mixed carbides 2.0%, WC balance, fine grain | HV30 1630 | Uncoated | Cast iron machining |
Recommended cutting speed vc [m/min] by material group
Swipe to see more →
| Group | Material | GTPP425 vc | GTPP440 vc | GTPK415 vc |
|---|---|---|---|---|
| P | Non-alloy steels ≤500 N/mm² | 200–320 | – | – |
| P | Non-alloy/low-alloy steels 500–900 N/mm² | 250–300 | – | – |
| P | Heat-resistant/nitride/tool steels >900 N/mm² | 140–220 | – | – |
| P | High-alloy steels >900 N/mm² | 120–200 | – | – |
| P | HSS | 50–90 | – | – |
| S | Special alloys (Inconel, Hastelloy, Nimonic) | – | 20–60 | – |
| S | Titanium and titanium alloys | – | 40–60 | – |
| M | Stainless steels ≤600 N/mm² | – | 140–220 | – |
| M | Stainless steels <900 N/mm² | – | 120–200 | – |
| M | Stainless/fireproof steels >900 N/mm² | – | 120–200 | – |
| K | Grey cast iron | – | – | 160–240 |
| K | Alloy grey cast iron | – | – | 100–180 |
| K | Spheroidal graphite cast iron, ferritic | – | – | 120–160 |
| K | Spheroidal graphite cast iron, ferritic/perlitic | – | – | 100–180 |
| K | Spheroidal graphite / malleable cast iron >600 N/mm² | – | – | 90–120 |
| K | Alloyed spheroidal graphite cast iron | – | – | 90–150 |
| K | Vermicular cast iron | – | – | 70–100 |
Recommended feed f [mm/rev] by drill diameter (broad guideline — increases with diameter and decreases for finishing passes)
Swipe to see more →
| Ø14–16.5 | Ø17–19.5 | Ø20–23 | Ø23.5–28 | Ø28.5–33 | Ø33.5–38 | Ø38.5–44 |
|---|---|---|---|---|---|---|
| 0.04–0.10 | 0.08–0.10 | 0.06–0.12 | 0.06–0.12 | 0.06–0.12 | 0.06–0.12 | 0.06–0.12 |
| 0.06–0.16 | 0.10–0.16 | 0.13–0.18 | 0.13–0.20 | 0.15–0.20 | 0.15–0.20 | 0.15–0.20 |
| 0.06–0.15 | 0.10–0.15 | 0.12–0.22 | 0.14–0.22 | 0.14–0.22 | 0.14–0.22 | 0.14–0.22 |
| 0.08–0.18 | 0.10–0.18 | 0.14–0.25 | 0.18–0.30 | 0.20–0.30 | 0.20–0.30 | 0.20–0.30 |
| 0.08–0.16 | 0.10–0.16 | 0.12–0.23 | 0.16–0.28 | 0.18–0.28 | 0.18–0.28 | 0.18–0.28 |
Reduce the tabulated feed rate by 30–60% for cross-holes, stack drilling, inclined or convex entry surfaces, and by up to 50% for spot drilling in a bead or central hole.