Multicut 4-in-1 indexable drilling, boring and turning tool
A 4-in-1 cutting tool for drilling, boring and turning — one indexable drill-turn system, Ø8.00–32.00 mm.
One tool. Four operations. Zero compromise.
MULTICUT turns drilling, boring, face turning, and external turning into a single indexable insert system — Ø8.00–32.00 mm, 1.5×D or 2.25×D deep, with true flat-bottom holes straight into solid material. No tool changes. No compromises.
One holder, two insert families: XPNT for general-purpose work, XPET for aluminium. Less programming, fewer tools and inserts to stock, real savings on acquisition, faster set-up — all from day one.
Four coated grades — GTCP425, GTCP435, GTPP430, and GTWN715 for aluminium — span the full ISO range (P, M, K, N, S). Optimised stability, Torx Plus clamping, and hard-and-tough surfaces keep every insert locked down and every chip moving, shift after shift.
Spare parts — Torx screws and extractors
Spare Parts
| Material No. | Type / Description | Key size |
|---|---|---|
| MM11206195 | 10002494 / TORX 08IP F | T08IP |
| MM1148748 | 10007404 / TORX 07IP F | T07IP |
| MM11843205 | 10014921 / TORX 06IP F | T06IP |
| MM11843208 | 10014922 / TORX 09IP F | T09IP |
| MM11450858 | 10006919 / TORX 15IP (extractor) | T15IP |
| MM11816974 | 10013909 / TORX 20IP (extractor) | T20IP |
Swipe to see more →
| Material No. | Type / Description | Length [mm] | Thread | Key size |
|---|---|---|---|---|
| MM11227305 | M3.0×7.0-09IP / 10003007 | 7 | M3.0 | T09IP |
| MM11610311 | M3.5×8.6-15IP / 1000749 | 8.6 | M3.5 | T15IP |
| MM11684214 | M2.2×5.0-07IP / 10009244 | 5 | M2.2 | T07IP |
| MM11684216 | M2.5×6.0-08IP / 10009243 | 6 | M2.5 | T08IP |
| MM11801441 | M4.5×10.5-20IP / 10013040 | 10.5 | M4.5 | T20IP |
| MM11807480 | M2.0×4.3-06IP / 10013332 | 4.3 | M2.0 | T06IP |
| MM11807484 | M1.8×3.6-06IP / 10013338 | 3.6 | M1.8 | T06IP |