Multicut 4-in-1 indexable drilling, boring and turning tool
A 4-in-1 cutting tool for drilling, boring and turning — one indexable drill-turn system, Ø8.00–32.00 mm.
One tool. Four operations. Zero compromise.
MULTICUT turns drilling, boring, face turning, and external turning into a single indexable insert system — Ø8.00–32.00 mm, 1.5×D or 2.25×D deep, with true flat-bottom holes straight into solid material. No tool changes. No compromises.
One holder, two insert families: XPNT for general-purpose work, XPET for aluminium. Less programming, fewer tools and inserts to stock, real savings on acquisition, faster set-up — all from day one.
Four coated grades — GTCP425, GTCP435, GTPP430, and GTWN715 for aluminium — span the full ISO range (P, M, K, N, S). Optimised stability, Torx Plus clamping, and hard-and-tough surfaces keep every insert locked down and every chip moving, shift after shift.
MultiCut tool holder — MC nominal-diameter / cutting-direction / insert-size designation
Designation System
Insert: XPNT 13 04 04 EN
- X — Insert shape
- P — Tolerances
- N — Clearance angle
- T — Form of top surface
- 13 — Cutting edge length
- 04 — Insert thickness
- 04 — Corner radius
- E — Cutting edge
- N — Cutting direction
Holder: MC 14 R-1.5D-07
- MC — MultiCut system
- 14 — Nominal diameter [mm]
- R — Cutting direction
- 1.5D — Maximum drilling depth
- 07 — Insert size