Multicut 4-in-1 indexable drilling, boring and turning tool
A 4-in-1 cutting tool for drilling, boring and turning — one indexable drill-turn system, Ø8.00–32.00 mm.
One tool. Four operations. Zero compromise.
MULTICUT turns drilling, boring, face turning, and external turning into a single indexable insert system — Ø8.00–32.00 mm, 1.5×D or 2.25×D deep, with true flat-bottom holes straight into solid material. No tool changes. No compromises.
One holder, two insert families: XPNT for general-purpose work, XPET for aluminium. Less programming, fewer tools and inserts to stock, real savings on acquisition, faster set-up — all from day one.
Four coated grades — GTCP425, GTCP435, GTPP430, and GTWN715 for aluminium — span the full ISO range (P, M, K, N, S). Optimised stability, Torx Plus clamping, and hard-and-tough surfaces keep every insert locked down and every chip moving, shift after shift.
EcoCut — bidirectional coolant supply for improved chip evacuation (2.25×D range)
Application Notes
Mounting of the insert: for tools Ø 8 mm, right-hand or left-hand inserts are required. From Ø 10–32 mm, neutral inserts are applied.
Machining across the centre line: if the machine has insufficient movement across the centre line, the external diameter cannot be machined with the same tool — use a right-hand MultiCut tool instead.
Through hole: with through holes, a sharp-edged disk is created as the tool breaks out. Safety measures are necessary.
Chip booster / coolant pressure (EcoCut, 2.25D range): an innovative bidirectional coolant supply improves chip evacuation, with an additional backwards-directed coolant stream from the flute area. Minimum coolant pressure 1.5–3 bar (optimum 5–7 bar).