SWX+ — Masterfinish Finishing

Name: Galtona
Address: Felspar Road, Amington Industrial Estate, Tamworth, B77 4DP, GB
Telephone: +44-121-769-1787

FEM-optimised Masterfinish geometry for high surface quality, steel "P15".

Example: CNMX 120408-SWX+. Depth of cut 0.50–3.00 mm, feed 0.35–0.15 mm.

Swipe to see more →

Designation	Chipbreaker	Material No.	Available
CNMX 120404-SWX+ GTCP115	…-SWX+	MM12078117	●
CNMX 120408-SWX+ GTCP115	…-SWX+	MM12078114	●
DNMX 150604-SWX+ GTCP115	…-SWX+	MM12078116	●
DNMX 150608-SWX+ GTCP115	…-SWX+	MM12078110	●
WNMX 080404-SWX+ GTCP115	…-SWX+	MM12078112	●
WNMX 080408-SWX+ GTCP115	…-SWX+	MM12078109	●

Cutting data — general cutting parameters by workpiece material

Swipe to see more →

Group	Type / alloy	Hardness HB	GTCP115 vc	GTCP125 vc	GTCP135 vc
P	Non-alloyed steel 0–0.45% C	150–250	220–400	170–240	170–190
P	Low-alloyed steel	250–300	200–320	100–190	90–150
P	High-alloyed steel	200	180–320	130–210	120–200
P	Corrosion-resistant steel	200	200–320	130–210	140–180
M	Ferritic stainless	200	220–320	140–210	140–200
M	Austenitic stainless	180	–	100–210	110–190
M	Duplex stainless	230–260	–	–	80–150
M	Martensitic stainless	330	–	70–100	55–75
K	Grey cast iron	180	140–370	130–210	–
K	Spheroidal cast iron	160	190–430	120–240	–
K	Malleable/tempered iron	130	180–520	150–250	–

Rated for consistent and inconsistent cutting depth; not for interrupted cuts.