Indexable Milling – Shoulder Milling
Cuatro sistemas de fresado de hombros: SSM-UA (2 filos), SSM-T (3 o 4 filos) y DSM-L de doble cara (4 filos): fresado de precisión a 90°.
Cuatro sistemas, una familia de fresado de hombros.
El SSM-UA (2×90°) utiliza plaquitas APKT/APHT con 2 filos de corte efectivos para ocho aplicaciones: fresado frontal, de ranuras, periférico, de penetración axial, de hombros, de penetración helicoidal, de cavidades y helicoidal. El SSM-T ofrece hasta 3 filos (TOKX) o 4 filos (SDKT/SDHT) para mayor precisión y menor coste por filo, hasta un 35 % más económico por filo que el APKT10. El DSM-L duplica la vida útil de la herramienta con plaquitas reversibles LNKU/LOKU para 4 filos por lado.
Los grados de rompevirutas abarcan HCM (acero), SCM (acero inoxidable), CCM (hierro fundido), LMM (aluminio), RCM (radio específico) y XCM (exótico/titanio), con recubrimientos GTCP230, GTPP235, GTPM240, GTCK215, GTWN715, GTC5235 y GTC5240.
DSM-L — LNKU/LOKU double-sided inserts, 4×90°
DSM-L — Shoulder Milling 4×90°
LNKU/LOKU double-sided inserts, 4 effective cutting edges.
Swipe to see more →
| Designation | Chipbreaker | Material No. | Available |
|---|---|---|---|
| LNKU 120608ER-HCM GTCP230 | HCM | MM12434604 | ● |
| LNKU 120608ER-HCM GTPP235 | HCM | MM12158008 | ● |
| LNKU 120608ER-SCM GTPM240 | SCM | MM12373789 | ● |
| LNKU 120608ER-CCM GTCK215 | CCM | MM14659156 | ● |
| LOKU 120608ER-SCM GTPM240 | SCM | MM12373779 | ● |
| LOKU 120608ER-XCM GTC5235 | XCM | — | ○ |
| LOKU 120608ER-XCM GTC5240 | XCM | — | ○ |
Bodies
Swipe to see more →
| Designation | ø Milling cutter [mm] | z | Material No. | Available |
|---|---|---|---|---|
| A-DSM-LO/LN12-40.R.04 | 40 | 4 | MM14549248 | ● |
| A-DSM-LO/LN12-50.R.05 | 50 | 5 | MM12367555 | ● |
| A-DSM-LO/LN12-63.R.06 | 63 | 6 | MM12645968 | ● |
| A-DSM-LO/LN12-80.R.07 | 80 | 7 | MM12645971 | ● |
| A-DSM-LO/LN12-100.R.08 | 100 | 8 | MM14684049 | ● |
| A-DSM-LO/LN12-125.R.09 | 125 | 9 | MM14684046 | ● |
| A-DSM-LO/LN12-160.R.11 | 160 | 11 | MM14685069 | ● |
Spare parts
Swipe to see more →
| Designation | Torque [Nm] | Material No. | Available |
|---|---|---|---|
| M4.0×11 – T15 | 5 | MM11042274 | ● |
| Power screw M8.0×30.0 (only for ø40) | 15 | MM11036880 | ● |
| Power screw M10.0×31.0 (only for ø50) | 20 | MM11040298 | ● |
Cutting data
Swipe to see more →
| Group | Material | Chipbreaker | Grades | vc [m/min] | fz [mm] | ap [mm] |
|---|---|---|---|---|---|---|
| P | Steel | HCM | GTCP230, GTPP235 | 220–60 | 0.05–0.3 | 12–2.0 |
| M | Stainless steel | SCM | GTPM240 | 200–60 | 0.04–0.28 | 12–2.0 |
| K | Cast iron | CCM | GTCK215 | 320–100 | 0.05–0.26 | 12–2.0 |