Turning Inserts – Positive (PST)
Sechs Spanrillen – von PWX Masterfinish bis WM+ Allzweck – für Stahl, Edelstahl und Gusseisen.
Galtonas PST-Reihe deckt das Drehen mit positiver Geometrie für Schlicht-, Standard- und Schwerdrehbearbeitung ab und verfügt über sechs spezielle Spannuten, die jeweils FEM-optimiert für ihren Anwendungsbereich sind.
Für die Stahlschlichtbearbeitung: PWX (Masterfinish-Geometrie, hohe Oberflächenqualität, auch als Schwerdrehsorte erhältlich) und JF (Cermet TCM10-Schlichtbearbeitung).
Für Spankontrolle und Standarddrehbearbeitung: WSF+ (optimierte Spankontrolle für Stahl und Edelstahl) und WM+ – die umfangreichste Reihe mit sieben Wendeschneidplattenformen für die Stahlsorten GTCP115, GTCP125, GTCP125HP und GTCP135 sowie die Edelstahlsorten GTCM120HP, GTPM125 und GTPM135M und Gusseisen GTCK120.
Für Edelstahl, Gusseisen, Nichteisenmetalle und exotische Werkstoffe: EN-EF (scharf geschliffene Schneide, extreme Oberflächengüte) und LMF+ (neuer Spanbrecher, erhältlich in einer Feinbearbeitungssorte und einer gröberen unbeschichteten Sorte H216T für größere Schnitttiefen).
WSF+ — chip control finishing
WSF+ — Chip Control Finishing
FEM-optimised for chip control across steel and stainless steel finishing grades.
Example: CCMT 09T308-WSF+. Depth of cut 0.15–2.25 mm, feed 0.20–0.07 mm. Rated for consistent cutting depth; inconsistent depth available on some grades, not for interrupted cuts.
Turning steel pos finishing "P15" — GTCP115
| Designation | Material No. | Available |
|---|---|---|
| CCMT 060204-WSF+ | MM12030470 | ● |
| CCMT 09T304-WSF+ | MM12030511 | ● |
| CCMT 09T308-WSF+ | MM12030567 | ● |
| CCMT 120404-WSF+ | MM12030568 | ● |
| DCMT 070204-WSF+ | MM12030692 | ● |
| DCMT 11T304-WSF+ | MM12167861 | ● |
Turning steel pos finishing "P25" — GTCP125
| Designation | Material No. | Available |
|---|---|---|
| CCMT 060202-WSF+ | MM11684867 | ● |
| CCMT 060204-WSF+ | MM11684913 | ● |
| CCMT 09T302-WSF+ | MM11684916 | ● |
| CCMT 09T304-WSF+ | MM11684923 | ● |
| CCMT 09T308-WSF+ | MM11684931 | ● |
| DCMT 070202-WSF+ | MM11684952 | ● |
| DCMT 070204-WSF+ | MM11684953 | ● |
| DCMT 11T302-WSF+ | MM11812677 | ● |
| DCMT 11T304-WSF+ | MM11686178 | ● |
| DCMT 11T308-WSF+ | MM11686185 | ● |
| VCMT 110302-WSF+ | MM11812680 | ● |
| VCMT 110304-WSF+ | MM11855132 | ● |
| VCMT 160404-WSF+ | MM11812683 | ● |
| VCMT 160408-WSF+ | MM12077363 | ● |
Turning steel pos finishing "P25" — GTCP125HP (new)
| Designation | Material No. | Available |
|---|---|---|
| CCMT 060202-WSF+ | MM14659047 | ● |
| CCMT 060204-WSF+ | MM14659053 | ● |
| CCMT 09T302-WSF+ | MM14659058 | ● |
| CCMT 09T304-WSF+ | MM14659061 | ● |
| CCMT 09T308-WSF+ | MM14659065 | ● |
| DCMT 070202-WSF+ | MM14659070 | ● |
| DCMT 070204-WSF+ | MM14659109 | ● |
| DCMT 11T302-WSF+ | MM14659133 | ● |
| DCMT 11T304-WSF+ | MM14659135 | ● |
| DCMT 11T308-WSF+ | MM14659138 | ● |
Turning steel pos finishing "M20" stainless — GTCM120HP
| Designation | Material No. | Available |
|---|---|---|
| CCMT 060202-WSF+ | MM141573467 | ● |
| CCMT 060204-WSF+ | MM141573469 | ● |
| CCMT 09T302-WSF+ | MM141573473 | ● |
| CCMT 09T304-WSF+ | MM141573477 | ● |
| DCMT 070202-WSF+ | MM141573478 | ● |
| DCMT 070204-WSF+ | MM141573482 | ● |
| DCMT 11T302-WSF+ | MM141573483 | ● |
| DCMT 11T304-WSF+ | MM141573486 | ● |
| VCMT 110302-WSF+ | MM141573491 | ● |
| VCMT 110304-WSF+ | MM141573494 | ● |
| VCMT 160404-WSF+ | MM141573495 | ● |
| VCMT 160408-WSF+ | MM141573497 | ○ |
Turning steel pos finishing "M25" stainless — GTPM125
| Designation | Material No. | Available |
|---|---|---|
| CCMT 060204-WSF+ | MM11782037 | ● |
| CCMT 09T302-WSF+ | MM11782051 | ● |
| CCMT 09T304-WSF+ | MM11782052 | ● |
| CCMT 09T308-WSF+ | MM11782054 | ● |
| DCMT 070202-WSF+ | MM11782055 | ● |
| DCMT 070204-WSF+ | MM11782056 | ● |
| DCMT 11T302-WSF+ | MM11812678 | ● |
| DCMT 11T304-WSF+ | MM11782058 | ● |
| DCMT 11T308-WSF+ | MM11782059 | ● |
| TCMT 110202-WSF+ | MM11906411 | ● |
| VCMT 110302-WSF+ | MM11812682 | ● |
| VCMT 110304-WSF+ | MM11855134 | ● |
| VCMT 160404-WSF+ | MM11812684 | ● |
Cutting data — steel grades by workpiece material
Swipe to see more →
| Group | Type / alloy | Hardness HB | GTCP115 vc | GTCP125HP vc | GTCP125 vc | GTCP135 vc |
|---|---|---|---|---|---|---|
| P | Non-alloyed steel 0–0.45% C | 150–250 | 220–400 | 200–270 | 170–240 | 170–190 |
| P | Low-alloyed steel | 250–300 | 200–320 | 115–210 | 100–190 | 90–150 |
| P | High-alloyed steel | 200 | 180–320 | 150–240 | 130–210 | 120–200 |
| P | Corrosion-resistant steel | 200 | 200–320 | 150–240 | 130–210 | 140–180 |
| M | Ferritic stainless | 200 | 220–320 | 160–240 | 140–210 | 140–200 |
| M | Austenitic stainless | 180 | – | 115–240 | 100–210 | 110–190 |
| M | Duplex stainless | 230–260 | – | – | – | 80–150 |
| M | Martensitic stainless | 330 | – | 80–115 | 70–100 | 55–75 |
| K | Grey cast iron | 180 | 140–370 | 150–240 | 130–210 | – |
| K | Spheroidal cast iron | 160 | 190–430 | 140–270 | 120–240 | – |
| K | Malleable/tempered iron | 130 | 180–520 | 170–290 | 150–250 | – |
Stainless-grade columns (GTCM120HP / GTPM125): non-alloyed steel 150–250, GTCM120HP 150–250, GTPM125 130–250; austenitic stainless 180, 140–220, 100–220; martensitic stainless 330, 40–100, 40–100.