Solid Mills — Vollständige Spezifikationen
Material Groups & Designation System
7 material-application groups (UN, ST, VA, TI, AL, H, V) and the milling-cutter designation code.
Galtona's Solid Mills range organizes every cutter first by target material group — UN (universal, steel/cast iron/stainless/heat-resistant), ST (micro tools, general/steel), VA and TI (titanium and high-temperature alloys), AL (aluminium and non-ferrous), H (hardened steel, up to 65 HRC), and V (router bits for plastics/composites/wood) — then by tool family (end mills, ball nose, torus, HPC roughers, micro tools, deburring, CPC, etc).
Designation example: 3A0007-03000.0080.R04.A00100.HA.C95
| Segment | Meaning |
|---|---|
| 3A0007 | Milling cutters (3) · metric without through coolant (A) · family 0007 |
| 03000 | Nominal diameter d₁ = 3.000 mm |
| 0080 | Cutting length l₂ = 8.0 mm |
| R04 | Cutting direction / number of teeth |
| A00100 | Cutting-edge chamfer 0.1 mm |
| HA | Shank version (DIN 6535-HA) |
| C95 | Coating |
Symbol legend used throughout the family tables
| Symbol | Meaning |
|---|---|
| UN / ST / VA / TI / AL / H / V | Material group (universal / micro-steel / high-temp / titanium / aluminium / hardened / router) |
| Z | Number of teeth |
| λ (helix angle) / γₛ (rake angle) | Geometry parameters |
| Coolant icon (crossed / with jet) | Without through coolant / with through coolant |
| E / D / E-D | Emulsion recommended / compressed air recommended / either |
| S / F₄₅° / R | Sharp cutting edge / cutting edge with 45° chamfer / radius corner or full ball nose |
| HA / HB / HE | Shank per DIN 6535-HA / -HB / -HE |
| d₁ = e8/f8/h6, dA = h5/h6 | Tolerance on cutting-edge diameter / shank diameter |
Full Family Index
Every tool family in the Solid Mills catalogue — diameter range, teeth, helix/rake angle, and coolant.
Complete cross-reference of all ~35 tool families across the 7 material groups, transcribed from the catalogue's master overview.
Swipe to see more →
| Group | Family | Type | Ø-range [mm] | Teeth | Helix λ | Rake γₛ | Coolant | Description |
|---|---|---|---|---|---|---|---|---|
| UN | SF | 0030 | 3.0–20.0 | Z2 | 30° | 14° | No | End mills, coated |
| UN | SF | 0314 | 3.0–20.0 | Z3 | 45° | 14° | No | End mills, coated |
| UN | SFM | 0318 | 3.0–20.0 | Z3 | 30° | 6° | No | End mills, coated |
| UN | VR | 0029 | 3.0–20.0 | Z2 | 30° | 2° | No | Ball nose milling cutters, coated |
| UN | VR | 0477 | 4.0–20.0 | Z4 | 35–38° | 3° | No | Ball nose milling cutters, coated |
| UN | HPC SF | 0007 | 3.0–20.0 | Z4 | 35/38° | 9° | No | HPC end mills, coated (R form) |
| UN | HPC SF | 0007 | 3.0–20.0 | Z4 | 35/38° | 9° | Yes | HPC end mills, coated (F45 form) |
| UN | HPC SF | 0007 | 6.0–20.0 | Z4 | 35/38° | 9° | Yes | HPC end mills, coated |
| UN | HPC SF | 4420 | 3.0–20.0 | Z4 | 21–45° / 25–42° | 15° | Yes | HPC end mills, coated |
| UN | HPC SF | 0027 | 6.0–20.0 | Z5 | 37/38° | 9° | No | HPC end mills, coated |
| UN | HPC SR | 0007 | 3.0–20.0 | Z4 | 35/38° | 9° | No | HPC rough milling cutters, coated |
| UN | CPC SF | 0003 | 6.0–20.0 | Z6/Z6/Z5 | 30–31° / 35–36° | 9° | Yes | CPC end mills (Circle Power Cutting), coated |
| UN | TF | 0489 | 6.0–20.0 | Z4 | 52° | 1° | Yes | Torus end mills, coated |
| UN | E | 0740/0741/0742 | 4.0–12.0 | Z4 | 0° | 0° | Yes | Deburring cutters (σ 90°/60°/120°), coated |
| UN | SR | 0423 | 4.0–20.0 | Z4 | 20° | 10° | Yes | Rough milling cutters, coated |
| ST | MSF | 0286 | 0.2–6.0 | Z2 | 30° | 5° | No | Micro end mills, coated |
| ST | MVR | 0285 | 0.2–6.0 | Z2 | 30° | 5° | No | Micro ball nose milling cutters, coated |
| ST | MTF | 0289 | 0.2–6.0 | Z2 | 30° | 5° | No | Micro torus milling cutters, coated |
| ST | HG SC | 0021 | 6.0–20.0 | Z6 | 48/50° | 13° | No | Finishing end mills, coated |
| VA | HPC SF | 0015 | 3.0–20.0 | Z3 | 47.5° / 45/42.5° | 5° | Yes | HPC end mills, coated |
| VA | KF | 0023 | 3.0–16.0 | Z4 | 35° | 8° | No | Tapered end mills, coated |
| TI | HPC SF | 0040 | 3.0–16.0 | Z4 | 35/38° | 13° | No | HPC end mills, coated |
| TI | HPC SF | 0039 | 3.0–20.0 | Z5 | 38° | 7° | No | HPC end mills, coated |
| TI | HPC TF | 0038 | 6.0–16.0 | Z6 | 48/50° | 13° | No | HPC Torus milling cutters, coated |
| AL | SF | 0008 | 3.0–20.0 | Z2 | 50° | 7° | Yes | End mills, coated |
| AL | SF | 0305 | 8.0–20.0 | Z3 | 5° | 15° | Yes | End mills, coated |
| AL | SF | 0009 | 3.0–20.0 | Z4 | 45° | 7° | Yes | End mills, coated |
| AL | SF | 0010 | 3.0–20.0 | Z3 | 45° | 7° | Yes | End mills, coated (S / F45 forms) |
| AL | TF | 0010 | 2.0–20.0 | Z3 | 45° | 7° | Yes | Torus milling cutters, coated |
| AL | VR | 0238 | 3.0–20.0 | Z2 | 45° | 13° | No | Ball nose milling cutters |
| AL | HPC SR | 0020 | 6.0–20.0 | Z3 | 36° | 11° | Yes | HPC rough milling cutters, coated |
| AL | HRC SR | 0376 | 6.0–20.0 | Z6 | 43.5/46.5° | 21° | Yes | HPC finish milling cutters, coated |
| AL | CPC | 0004 | 6.0–20.0 | Z4 | 45° | 7° | Yes | CPC (Circle Power Cutting) |
| AL | MSF | 0242 | 0.4–6.0 | Z2 | 45° | 13° | Yes | Micro end mills, coated |
| AL | MTF | 0249 | 0.3–6.0 | Z2 | 45° | 13° | Yes | Micro torus milling cutters, coated |
| AL | MVR | 0239 | 0.3–5.0 | Z2 | 45° | 13° | No | Micro ball nose milling cutters, coated |
| H | HPC SF | 0453 | 3.0–20.0 | Z4 | 44/47° | 1° | Yes | HPC end mills, coated |
| H | SC | 3367 | 3.0–20.0 | Z6 | 50° | 0° | No | Finish milling cutters, coated |
| H | CPC SF | 0006 | 6.0–20.0 | Z6 | 50° | −6° | No | CPC end mills (Circle Power Cutting), coated |
| H | VR | 0281 | 2.0–20.0 | Z2 | 30° | −15° | No | Ball nose milling cutters, coated |
| V | MRO | 0032–0036 | 6.0–12.7 | Z8 / Z4 | −7° to 30°/35° | 13–18° | No | Router milling cutters, coated |
UN Group — Universal End Mills, Ball Nose & HPC
Steel, cast iron, and stainless applications: SF end mills, VR ball nose, and HPC roughing/finishing families.
UN — VR 0477 ball nose (Ø4.0–20.0mm, Z4, λ=35–38°)
Swipe to see more →
| d₁ [mm] | Type | dA [mm] | l₁ [mm] | l₂ [mm] | Material Master |
|---|---|---|---|---|---|
| 4 | 3A0477-04000.0110.R04.R02000.HA.C95 | 6 | 57 | 11.0 | GM14542004 |
| 5 | 3A0477-05000.0130.R04.R02500.HA.C95 | 6 | 57 | 13.0 | GM14542008 |
| 6 | 3A0477-06000.0130.R04.R03000.HA.C95 | 6 | 57 | 13.0 | GM14542053 |
| 8 | 3A0477-08000.0190.R04.R04000.HA.C95 | 8 | 72 | 19.0 | GM14542147 |
| 10 | 3A0477-10000.0220.R04.R05000.HA.C95 | 10 | 72 | 22.0 | GM14542148 |
| 12 | 3A0477-12000.0260.R04.R06000.HA.C95 | 12 | 83 | 26.0 | GM14542151 |
| 16 | 3A0477-16000.0320.R04.R08000.HA.C95 | 16 | 92 | 32.0 | GM14542154 |
| 20 | 3A0477-20000.0380.R04.R10000.HA.C95 | 20 | 104 | 38.0 | GM14542185 |
UN — HPC SF 0007 (Ø3.0–20.0mm, Z4, λ=35/38°) — representative sizes with radius variants
Swipe to see more →
| d₁ [mm] | Type | dA [mm] | d₃ [mm] | l₁ [mm] | r [mm] | Material Master |
|---|---|---|---|---|---|---|
| 3 | 3A0007-03000.0080.R04.R00100.HA.C95 | 6 | 2.8 | 57 | 0.1 | GM14529711 |
| 6 | 3A0007-06000.0130.R04.R01500.HA.C95 | 6 | 5.8 | 57 | 1.5 | GM14826637 |
| 8 | 3A0007-08000.0210.R04.R02000.HA.C95 | 8 | 7.7 | 63 | 2.0 | GM14826687 |
| 10 | 3A0007-10000.0220.R04.R02000.HA.C95 | 10 | 9.7 | 72 | 2.0 | GM14826698 |
| 12 | 3A0007-12000.0260.R04.R02000.HA.C95 | 12 | 11.6 | 83 | 2.0 | GM14826744 |
| 16 | 3A0007-16000.0360.R04.R02000.HA.C95 | 16 | 15.5 | 92 | 2.0 | GM14826760 |
| 20 | 3A0007-20000.0410.R04.R01000.HA.C95 | 20 | 19.5 | 104 | 1.0 | GM14529782 |
Each diameter is available in multiple corner-radius (r) options from 0.1mm up to 2.0mm — full radius matrix available on request. Full dimension tables for SF 0030/0314/SFM 0318, HPC SF 4420/0027, HPC SR 0007, CPC SF 0003, TF 0489, deburring cutters (E 0740/0741/0742), and SR 0423 available on request.
ST, VA & TI Groups — Micro, High-Temp & Titanium Tools
Micro end mills down to Ø0.2mm, and dedicated titanium/heat-resistant-alloy HPC end mills.
ST — MSF 0286 micro end mills (Ø0.2–6.0mm, Z2, λ=30°)
Swipe to see more →
| d₁ [mm] | Type | dA [mm] | l₁ [mm] | l₂ [mm] | Material Master |
|---|---|---|---|---|---|
| 0.2 | 3A0286-00200.0005.R02.A00020.HA.B550 | 6 | 55 | 0.18 | GMW0286002740 |
| 0.5 | 3A0286-00500.0012.R02.A00050.HA.B550 | 6 | 55 | 0.45 | GMW0286005740 |
| 1.0 | 3A0286-01000.0015.R02.A00100.HA.B550 | 6 | 65 | 0.95 | GMW0286010G40 |
| 2.0 | 3A0286-02000.0020.R02.A00100.HA.B550 | 6 | 65 | 1.92 | GMW0286020440 |
| 3.0 | 3A0286-03000.0030.R02.A00100.HA.B550 | 6 | 100 | 2.9 | GMW0286030740 |
| 6.0 | 3A0286-06000.0060.R02.A00100.HA.B550 | 6 | 100 | 5.9 | GMW0286060740 |
Full MSF diameter range (0.2–6.0mm, 17 sizes) plus MVR micro ball nose (p.65) and MTF micro torus (p.73) tables available on request. ST — HG SC finishing end mills (Ø6.0–20.0mm) also available.
TI — HPC SF 0039 titanium end mills (Ø3.0–20.0mm, Z5, λ=38°)
Swipe to see more →
| d₁ [mm] | Type | dA [mm] | d₃ [mm] | l₁ [mm] | Material Master |
|---|---|---|---|---|---|
| 3 | 3A0039-03000.0080.R05.R00200.HB.C200 | 6 | 2.8 | 57 | GM14617177 |
| 6 | 3A0039-06000.0130.R05.R00200.HB.C200 | 6 | 5.8 | 57 | GM14617195 |
| 10 | 3A0039-10000.0220.R05.R00200.HB.C200 | 10 | 9.7 | 72 | GM14617198 |
| 16 | 3A0039-16000.0360.R05.R00300.HB.C200 | 16 | 15.5 | 92 | GM14617200 |
| 20 | 3A0039-20000.0410.R05.R04000.HB.C200 | 20 | 19.5 | 104 | GM14617226 |
Full VA — HPC SF 0015, VA — KF tapered end mills, TI — HPC SF 0040, and TI — HPC TF 0038 torus cutter tables available on request.
AL, H & V Groups — Aluminium, Hardened Steel & Router Tools
High-helix aluminium end mills, ball-nose cutters for hardened steel up to 65 HRC, and router bits for plastics/composites.
AL — SF 0008 aluminium end mills (Ø3.0–20.0mm, Z2, λ=50°, through coolant)
Swipe to see more →
| d₁ [mm] | Type | dA [mm] | l₁ [mm] | l₂ [mm] | Material Master |
|---|---|---|---|---|---|
| 3 | 3A0008-03000.0080.R02.A00100.HB.B580 | 6 | 58 | 8.0 | GM12255283 |
| 6 | 3A0008-06000.0160.R02.A00100.HB.B580 | 6 | 70 | 16.0 | GM12255294 |
| 10 | 3A0008-10000.0260.R02.A00100.HB.B580 | 10 | 94 | 26.0 | GM12255304 |
| 14 | 3A0008-14000.0360.R02.A00100.HB.B580 | 14 | 119 | 36.0 | GM12255317 |
| 18 | 3A0008-18000.0470.R02.A00100.HB.B580 | 18 | 142 | 47.0 | GM12255326 |
| 20 | 3A0008-20000.0820.R02.A00100.HB.B580 | 20 | 214 | 82.0 | GM12257074 |
Each diameter offered in 2–4 different overall/flute-length combinations (short, standard, long, extra-long). Full AL — SF 0009/0010/0305, TF 0010, VR 0238, HPC SR 0020, HRC SR 0376, CPC 0004, and micro (MSF/MTF/MVR) tables available on request.
H — VR 0281 ball nose for hardened steel (Ø2.0–20.0mm, Z2, λ=30°, γₛ=−15°)
Swipe to see more →
| d₁ [mm] | Type | dA [mm] | l₁ [mm] | l₂ [mm] | Material Master |
|---|---|---|---|---|---|
| 2.0 | 3A0281-02000.0020.R02.R01000.HA.B550 | 4 | 54 | 2.0 | GMW0281020440 |
| 3.0 | 3A0281-03000.0050.R02.R01500.HA.B550 | 4 | 54 | 5.0 | GMW0281030340 |
| 5.0 | 3A0281-05000.0090.R02.R02500.HA.B550 | 5 | 54 | 9.0 | GMW0281050240 |
| 8.0 | 3A0281-08000.0120.R02.R04000.HA.B550 | 8 | 64 | 12.0 | GMW0281080340 |
| 10.0 | 3A0281-10000.0140.R02.R05000.HA.B550 | 10 | 67 | 14.0 | GMW0281100340 |
| 12.0 | 3A0281-12000.0160.R02.R06000.HA.B550 | 12 | 75 | 16.0 | GMW0281120440 |
The negative rake (γₛ = −15°) suits hardened tool steel from 55 HRC up to 65 HRC. Full H — HPC SF 0453, SC 3367, and CPC SF 0006 tables available on request.
V — MRO 0035 router bits (Ø6.0–12.7mm, Z4, λ=30°/35°) — full range
Swipe to see more →
| d₁ [mm] | Type | dA [mm] | l₁ [mm] | l₂ [mm] | Material Master |
|---|---|---|---|---|---|
| 6.000 | 3A0035-06000.0180.R04L06..HA.K131 | 6.000 | 60 | 18 | GM14580674 |
| 6.350 | 3A0035-06350.0180.R04L06..HA.K131 | 6.350 | 60 | 18 | GM14580678 |
| 8.000 | 3A0035-08000.0260.R04L06..HA.K131 | 8.000 | 70 | 26 | GM14580679 |
| 9.525 | 3A0035-09525.0300.R04L06..HA.K131 | 9.525 | 80 | 30 | GM14580682 |
| 10.000 | 3A0035-10000.0300.R04L06..HA.K131 | 10.000 | 80 | 30 | GM14580685 |
| 12.000 | 3A0035-12000.0300.R06L08..HA.K131 | 12.000 | 85 | 30 | GM14580686 |
| 12.700 | 3A0035-12700.0300.R06L08..HA.K131 | 12.700 | 85 | 30 | GM14580687 |
Diameters include both metric (6.0, 8.0, 10.0, 12.0mm) and imperial-equivalent (6.35=¼″, 9.525=⅜″, 12.7=½″) sizes for plastics, composites, and wood routing. Full MRO 0032/0033/0034/0036 variants (different helix/rake combinations) available on request.
Technical Data — Cutting Parameters & Material Reference
Per-family Vc/fz cutting-data tables, hardness conversion, and DIN/AFNOR/UNI/BS/JIS/GOST/UNS material cross-reference.
Each tool family's page includes a matching cutting-data table keyed by material index (e.g. 1.1.1 = machining steel, 4.1.1 = stainless steel, 7.8.1 = titanium), giving cutting speed vc [m/min] and feed-per-tooth fz [mm] across the tool's diameter range. Example below is from the UN — HPC SF 0007 family page.
Example cutting-data table (UN — HPC SF 0007)
Swipe to see more →
| Index | Material | Vc [m/min] | fz Ø3.0 | fz Ø6.0 | fz Ø10.0 | fz Ø20.0 |
|---|---|---|---|---|---|---|
| 1.1.1 | Machining steels | 260 | 0.031 | 0.063 | 0.096 | 0.130 |
| 2.1.1 | Cementation steel | 230 | 0.024 | 0.047 | 0.069 | 0.092 |
| 4.1.1 | Stainless steel | 110 | 0.012 | 0.026 | 0.040 | 0.056 |
| 4.2.1 | Heat-resistant alloys | 30 | 0.010 | 0.020 | 0.030 | 0.041 |
| 6.1.1 | Cast iron w/ lamellar graphite | 220 | 0.031 | 0.063 | 0.096 | 0.130 |
| 7.8.1 | Titanium | 90 | 0.020 | 0.040 | 0.060 | 0.081 |
Values vary per tool family — every family page in the catalogue carries its own complete Vc/fz table across ~40 material sub-groups (steels, stainless, cast iron, non-ferrous, titanium, and plastics).
Hardness conversion (excerpt, per DIN EN ISO18265)
Swipe to see more →
| Tensile strength N/mm² | Vickers HV | Brinell HB | Rockwell HRC |
|---|---|---|---|
| 640 | 200 | 190 | 12 |
| 900 | 280 | 268 | 27.1 |
| 1220 | 380 | 361 | 38.8 |
| 1595 | 490 | 466 | 48.4 |
| 2030 | 610 | 580 | 55.7 |
| 2660 | 760 | 708 | 64.3 |
| 3150 | 900 | — | 69.3 |
The catalogue's Technical Information section (pages 148–166) also includes an extensive materials cross-reference (DIN, AFNOR, UNI, BS, JIS, SS, GOST, UNS, and USA equivalents) spanning 8 main material groups — machining/constructional/spring steels, cementation/nitriding/tempered steels, tool steels, stainless steel, cast steel/iron, non-ferrous metals, titanium, and plastics — available in full on request.