Indexable Milling – Form Milling
Rundeinsatz-Formfräsen — SSM-R einseitig (RPMX/RDHX/RPHX/RDHW, IC10/IC12/IC16) und DSM-R doppelseitig (RNKU/ROHU, IC12/IC16).
Zwei Rundwendeplattensysteme, Flexibilität mit einem Werkzeug.
SSM-R deckt das Plan-, Winkel-, Nut-, Taschen-, Profil-, Spiral-, Eintauch- und Drehfräsen mit Rundwendeplatten (RPMX, RDHX, RPHX, RDHW) über die IC10/IC12/IC16 ab, 4- oder 8-fach wendbar. DSM-R kombiniert eine Rundwendeplatte für hohe Robustheit mit einer Planwendeplatte für die Schlichtbearbeitung – 4-fach wendbar für 8 Nebenschneiden pro Seite, Oberflächenrauheit bis Ra 1 μm (gegenüber 3 μm bei einer Standard-Rundwendeplatte).
SSM-R deckt das Planfräsen, Schrägfräsen, Nutfräsen, Taschenfräsen, Profilfräsen, Spiral-, Eintauch- und Drehfräsen mit Rundwendeplatten (RPMX, RDHX, RPHX, RDHW) ab. Diese sind 4- oder 8-fach wendbar. Die Chipbreaker-Sorten umfassen HCM, SCM, XCM (exotisch/Titan), LMM (Aluminium) und MOSN (verstärkt für harte Werkstoffe) in den Beschichtungen GTCP230, GTPP235, GTPM240, GTWN715, GTC5235, GTC5240 und GTP6215.
DSM-R — double-sided round inserts, RNKU/ROHU
DSM-R — Double-Sided Round Inserts
RNKU/ROHU inserts, 4 times indexable and reversible for 8 minor cutting edges per side — pairs a round insert for robustness with a surfacing insert for finishing (Ra 1 μm vs. 3 μm for a standard round insert).
R12
Swipe to see more →
| Designation | Chipbreaker | Material No. | Available |
|---|---|---|---|
| RNKU 1204MOER-HCM GTCP230 | HCM | MM11979067 | ● |
| RNKU 1204MOER-HCM GTPP235 | HCM | MM11979068 | ● |
| ROHU 1204MOER-SCM GTPM240 | SCM | MM12376587 | ● |
| ROHU 1204MOER-SCM GTC5235 | SCM | MM12193450 | ● |
R12 bodies
Swipe to see more →
| Designation | ø Milling cutter [mm] | z | Material No. | Available |
|---|---|---|---|---|
| C-DSM-R12-32.R.03-A-70-131 | 32 | 3 | MM11775976 | ● |
| C-DSM-R12-32.R.03-A-70-165 | 32 | 3 | MM11984880 | ● |
| A-DSM-R12-40.R.04 | 40 | 4 | MM11718939 | ● |
| A-DSM-R12-50.R.05 | 50 | 5 | MM11775978 | ● |
| A-DSM-R12-63.R.06 | 63 | 6 | MM11775977 | ● |
| A-DSM-R12-80.R.08 | 80 | 8 | MM11984879 | ● |
| A-DSM-R12-100.R.10 | 100 | 10 | MM11984878 | ● |
Cutting data — R12
Swipe to see more →
| Group | Material | Chipbreaker | Grades | vc [m/min] | fz [mm] | ap [mm] |
|---|---|---|---|---|---|---|
| P | Steel | HCM | GTCP230, GTPP235 | 220–60 | 0.2–0.8 | 3–0.5 |
| M | Stainless steel | SCM | GTPM240, GTC5235 | 200–60 | 0.1–0.45 | 3–0.5 |
R16
Swipe to see more →
| Designation | Chipbreaker | Material No. | Available |
|---|---|---|---|
| RNKU 1605MOER-HCM GTCP230 | HCM | MM12193454 | ● |
| RNKU 1605MOER-HCM GTPP235 | HCM | MM12193465 | ● |
| ROHU 1605MOER-SCM GTPM240 | SCM | MM14652625 | ● |
| ROHU 1605MOER-SCM GTC5235 | SCM | MM12193480 | ● |
R16 bodies
Swipe to see more →
| Designation | ø Milling cutter [mm] | z | Material No. | Available |
|---|---|---|---|---|
| A-DSM-R16-50.R.03 | 50 | 3 | — | ○ |
| A-DSM-R16-63.R.05 | 63 | 5 | MM11928824 | ● |
| A-DSM-R16-80.R.06 | 80 | 6 | — | ○ |
| A-DSM-R16-100.R.07 | 100 | 7 | — | ○ |
| A-DSM-R16-125.R.08 | 125 | 8 | — | ○ |
Cutting data — R16
Swipe to see more →
| Group | Material | Chipbreaker | Grades | vc [m/min] | fz [mm] | ap [mm] |
|---|---|---|---|---|---|---|
| P | Steel | HCM | GTCP230, GTPP235 | 220–60 | 0.25–0.8 | 4–0.5 |
| M | Stainless steel | SCM | GTPM240, GTC5235 | 200–60 | 0.2–0.6 | 4–0.5 |
Spare parts
Swipe to see more →
| Designation | Torque [Nm] | Material No. | Available |
|---|---|---|---|
| Screw M4.0×11.0 – T15+ (R12) | 5 | MM1345432 | ● |
| Power screw M8.0×30.0 (only for A-DSM-R12-40.R.04) | 15 | MM11036880 | ● |
| M4.5×13.0 – T20 (R16) | 5 | MM188399 | ● |
| Power screw M10.0×31.0 (only for A-DSM-R16-50.R.03) | 20 | MM11040298 | ● |