Indexable Milling – Face Milling
Drei Stirnfrässysteme – SSM-H (6×45°), DSM-S (8×45°) und DSM-H (12×45°) – bis zu 12 effektive Schneidkanten.
Drei Planfrässysteme, eine Familie.
SSM-H (6×45°) ist für universelle HPKT/HPCT- und achteckige HOKT/HOCT-Wendeschneidplatten geeignet. DSM-S (8×45°) verwendet die doppelseitige, wendbare SOKU-Wendeschneidplatte für 8 effektive Schneiden. DSM-H (12×45°) verwendet HNKU/HOKU-Wendeschneidplatten für 12 Schneiden und maximale Wirtschaftlichkeit.
Alle drei Systeme verfügen über die Masterfinish-Geometrie für einen besonders weichen, spindelschonenden Schnitt mit direkter Wendeschneidplattenpositionierung, die kein Lösen der Spannschraube erfordert. Die Fräserkörper decken den Bereich Ø40–160 mm ab.
Die Sorten decken das gesamte Spektrum ab – von allgemeinem Stahl (GCP230, GPP235) über Edelstahl (GC5235, GPM240) und Gusseisen (GCK215, GPK220) bis hin zu Nichteisenmetallen (GTWN715) – sodass eine Familie nahezu alle Stirnfräsarbeiten bewältigen kann.
SSM-H 6×45° — HPKT/HPCT general-purpose & HOKT/HOCT octagon inserts
SSM-H — Face Milling 6×45°
Masterfinish geometry, 6 effective cutting edges. HPKT/HPCT for general use, HOKT/HOCT (octagon) for extra edges.
Applications: Face milling, slot milling, chamfering.
Chipbreakers: HCM — steel, cast iron (secondary). SCM — stainless steel, exotic alloys (secondary), titanium (secondary). LMM — aluminium and non-ferrous metals (HPKT/HPCT only).
Indexing without full clamping-screw removal saves set-up time.
HPKT / HPCT inserts
Swipe to see more →
| Designation | Chipbreaker | Material No. | Available |
|---|---|---|---|
| HPKT 0604AZER-HCM GTCP230 | HCM | MM12193366 | ● |
| HPKT 0604AZER-HCM GTPP235 | HCM | MM12193369 | ● |
| HPKT 0604AZER-SCM GTC5235 | SCM | MM11526389 | ● |
| HPCT 0604AZER-LMM GTWN715 | LMM | MM14652610 | ● |
Cutting data
Swipe to see more →
| Group | Material | Chipbreaker | Grades | vc [m/min] | fz [mm] | ap [mm] |
|---|---|---|---|---|---|---|
| P | Steel | HCM | GCP230, GPP235 | 220–60 | 0.12–0.3 | 4–0.3 |
| M | Stainless steel | SCM | GC5235 | 200–60 | 0.1–0.25 | 4–0.3 |
| N | Non-ferrous | LMM | GWN715 | < 2000 | 0.05–0.35 | 4–0.3 |
HOKT / HOCT inserts (octagon)
Swipe to see more →
| Designation | Chipbreaker | Material No. | Available |
|---|---|---|---|
| HOKT 0604AZER-HCM GTCP230 | HCM | MM11950674 | ● |
| HOKT 0604AZER-HCM GTPP235 | HCM | MM11943817 | ● |
| HOCT 0604AZER-SCM GTPM240 | SCM | MM14652624 | ● |
| HOCT 0604AZER-SCM GTC5235 | SCM | MM12212264 | ● |
Cutting data
Swipe to see more →
| Group | Material | Chipbreaker | Grades | vc [m/min] | fz [mm] | ap [mm] |
|---|---|---|---|---|---|---|
| P | Steel | HCM | GCP230, GPP235 | 220–60 | 0.1–0.3 | 4–0.3 |
| M | Stainless steel | SCM | GPM240, GC5235 | 200–60 | 0.1–0.25 | 4–0.3 |
Bodies (shared by both insert types)
Swipe to see more →
| Designation | ø Milling cutter [mm] | z | Material No. | Available |
|---|---|---|---|---|
| C-SSM-H06-40.R.04-B32-50-110 | 40 | 4 | MM11520454 | ● |
| A-SSM-H06-40.R.04 | 40 | 4 | MM11520455 | ● |
| A-SSM-H06-50.R.05 | 50 | 5 | MM11520456 | ● |
| A-SSM-H06-63.R.06 | 63 | 6 | MM11520457 | ● |
| A-SSM-H06-80.R.07 | 80 | 7 | MM11520458 | ● |
| A-SSM-H06-100.R.09 | 100 | 9 | MM11520459 | ● |
| A-SSM-H06-125.R.10 | 125 | 10 | MM11520460 | ● |
Spare parts
Swipe to see more →
| Designation | Torque [Nm] | Material No. | Available |
|---|---|---|---|
| M4.0 × 11 – T15+ | 5 | MM1345432 | ● |
| Power screw M8.0 × 30.0 (only for A-SSM-H06-40.R.04) | 15 | MM11036880 | ● |