Indexable Milling – Face Milling
Drei Stirnfrässysteme – SSM-H (6×45°), DSM-S (8×45°) und DSM-H (12×45°) – bis zu 12 effektive Schneidkanten.
Drei Planfrässysteme, eine Familie.
SSM-H (6×45°) ist für universelle HPKT/HPCT- und achteckige HOKT/HOCT-Wendeschneidplatten geeignet. DSM-S (8×45°) verwendet die doppelseitige, wendbare SOKU-Wendeschneidplatte für 8 effektive Schneiden. DSM-H (12×45°) verwendet HNKU/HOKU-Wendeschneidplatten für 12 Schneiden und maximale Wirtschaftlichkeit.
Alle drei Systeme verfügen über die Masterfinish-Geometrie für einen besonders weichen, spindelschonenden Schnitt mit direkter Wendeschneidplattenpositionierung, die kein Lösen der Spannschraube erfordert. Die Fräserkörper decken den Bereich Ø40–160 mm ab.
Die Sorten decken das gesamte Spektrum ab – von allgemeinem Stahl (GCP230, GPP235) über Edelstahl (GC5235, GPM240) und Gusseisen (GCK215, GPK220) bis hin zu Nichteisenmetallen (GTWN715) – sodass eine Familie nahezu alle Stirnfräsarbeiten bewältigen kann.
DSM-H 12×45° — HNKU/HOKU, 12 cutting edges
DSM-H — Face Milling 12×45°
Masterfinish geometry with 12 cutting edges for maximised economy. HNKU for general use, HOKU (octagon) variant available.
Applications: Face milling, slot milling, chamfering.
Chipbreakers: HCM — steel, cast iron (secondary). SCM — stainless steel, exotic alloys (secondary), titanium (secondary).
Indexing 6 times and reversible.
HNKU inserts
Swipe to see more →
| Designation | Chipbreaker | Material No. | Available |
|---|---|---|---|
| HNKU 0806AZER-HCM GTCP230 | HCM | MM12193383 | ● |
| HNKU 0806AZER-HCM GTPP235 | HCM | MM12193384 | ● |
| HNKU 0806AZER-SCM GTPM240 | SCM | — | ○ |
| HNKU 0806AZER-SCM GTC5235 | SCM | MM11887368 | ● |
Cutting data — HNKU
Swipe to see more →
| Group | Material | Chipbreaker | Grades | vc [m/min] | fz [mm] | ap [mm] |
|---|---|---|---|---|---|---|
| P | Steel | HCM | GTCP230, GTPP235 | 220–60 | 0.1–0.5 | 4–0.2 |
| M | Stainless steel | SCM | GTPM240, GTC5235 | 200–60 | 0.08–0.4 | 4–0.2 |
HOKU inserts (octagon)
Swipe to see more →
| Designation | Chipbreaker | Material No. | Available |
|---|---|---|---|
| HOKU 0806AZER-HCM GTCP230 | HCM | MM12623510 | ● |
| HOKU 0806AZER-HCM GTPP235 | HCM | MM12623511 | ● |
| HOKU 0806AZER-SCM GTPM240 | SCM | MM12630187 | ● |
| HOKU 0806AZER-SCM GTC5235 | SCM | MM12623507 | ● |
Cutting data — HOKU
Swipe to see more →
| Group | Material | Chipbreaker | Grades | vc [m/min] | fz [mm] | ap [mm] |
|---|---|---|---|---|---|---|
| P | Steel | HCM | GTCP230, GTPP235 | 220–60 | 0.1–0.5 | 4–0.2 |
| M | Stainless steel | SCM | GTPM240, GTC5235 | 200–60 | 0.08–0.4 | 4–0.2 |
Bodies (shared by both insert types)
Swipe to see more →
| Designation | ø Milling cutter [mm] | z | Material No. | Available |
|---|---|---|---|---|
| A-DSM-H08-40.R.04 | 40 | 4 | MM11590448 | ● |
| A-DSM-H08-50.R.04 | 50 | 4 | MM11561804 | ● |
| A-DSM-H08-63.R.05 | 63 | 5 | MM11561802 | ● |
| A-DSM-H08-80.R.06 | 80 | 6 | MM11561800 | ● |
| A-DSM-H08-100.R.08 | 100 | 8 | MM12152205 | ● |
| A-DSM-H08-125.R.09 | 125 | 9 | MM12152207 | ● |
Spare parts
Swipe to see more →
| Designation | Torque [Nm] | Material No. | Available |
|---|---|---|---|
| M4.0 × 11.0 – T15+ | 5 | MM1345432 | ● |