Turning Inserts – Positive (PST)
Seks spånriller — fra PWX Masterfinish til WM+ universal — der spænder over stål, rustfrit stål og støbejern.
Galtonas PST-sortiment dækker positiv geometrisk drejning på tværs af sletbearbejdning, generel drejning og kraftigere indgreb, med seks dedikerede spånspor, hver FEM-optimeret til sin anvendelse.
Til stålsletbearbejdning: PWX (Masterfinish-geometri, høj overfladekvalitet, også tilgængelig som kraftig drejningskvalitet) og JF (cermet TCM10-sletbearbejdning).
Til spånkontrol og generel drejning: WSF+ (optimeret spånkontrol på tværs af stål- og rustfri stålkvaliteter) og WM+ — det bredeste sortiment, der spænder over 7 skærformer på tværs af GTCP115, GTCP125, GTCP125HP, GTCP135 stålkvaliteter plus rustfrit GTCM120HP/GTPM125/GTPM135M og støbejern GTCK120.
Til rustfrit stål, støbejern, ikke-jernholdige og eksotiske materialer: EN-EF (skarp slebet kant, ekstrem sletbearbejdning) og LMF+ (ny spånbryder, tilgængelig i en fin sletbearbejdningskvalitet og en kraftigere ubelagt H216T-kvalitet til større spåndybder).
WSF+ — chip control finishing
WSF+ — Chip Control Finishing
FEM-optimised for chip control across steel and stainless steel finishing grades.
Example: CCMT 09T308-WSF+. Depth of cut 0.15–2.25 mm, feed 0.20–0.07 mm. Rated for consistent cutting depth; inconsistent depth available on some grades, not for interrupted cuts.
Turning steel pos finishing "P15" — GTCP115
| Designation | Material No. | Available |
|---|---|---|
| CCMT 060204-WSF+ | MM12030470 | ● |
| CCMT 09T304-WSF+ | MM12030511 | ● |
| CCMT 09T308-WSF+ | MM12030567 | ● |
| CCMT 120404-WSF+ | MM12030568 | ● |
| DCMT 070204-WSF+ | MM12030692 | ● |
| DCMT 11T304-WSF+ | MM12167861 | ● |
Turning steel pos finishing "P25" — GTCP125
| Designation | Material No. | Available |
|---|---|---|
| CCMT 060202-WSF+ | MM11684867 | ● |
| CCMT 060204-WSF+ | MM11684913 | ● |
| CCMT 09T302-WSF+ | MM11684916 | ● |
| CCMT 09T304-WSF+ | MM11684923 | ● |
| CCMT 09T308-WSF+ | MM11684931 | ● |
| DCMT 070202-WSF+ | MM11684952 | ● |
| DCMT 070204-WSF+ | MM11684953 | ● |
| DCMT 11T302-WSF+ | MM11812677 | ● |
| DCMT 11T304-WSF+ | MM11686178 | ● |
| DCMT 11T308-WSF+ | MM11686185 | ● |
| VCMT 110302-WSF+ | MM11812680 | ● |
| VCMT 110304-WSF+ | MM11855132 | ● |
| VCMT 160404-WSF+ | MM11812683 | ● |
| VCMT 160408-WSF+ | MM12077363 | ● |
Turning steel pos finishing "P25" — GTCP125HP (new)
| Designation | Material No. | Available |
|---|---|---|
| CCMT 060202-WSF+ | MM14659047 | ● |
| CCMT 060204-WSF+ | MM14659053 | ● |
| CCMT 09T302-WSF+ | MM14659058 | ● |
| CCMT 09T304-WSF+ | MM14659061 | ● |
| CCMT 09T308-WSF+ | MM14659065 | ● |
| DCMT 070202-WSF+ | MM14659070 | ● |
| DCMT 070204-WSF+ | MM14659109 | ● |
| DCMT 11T302-WSF+ | MM14659133 | ● |
| DCMT 11T304-WSF+ | MM14659135 | ● |
| DCMT 11T308-WSF+ | MM14659138 | ● |
Turning steel pos finishing "M20" stainless — GTCM120HP
| Designation | Material No. | Available |
|---|---|---|
| CCMT 060202-WSF+ | MM141573467 | ● |
| CCMT 060204-WSF+ | MM141573469 | ● |
| CCMT 09T302-WSF+ | MM141573473 | ● |
| CCMT 09T304-WSF+ | MM141573477 | ● |
| DCMT 070202-WSF+ | MM141573478 | ● |
| DCMT 070204-WSF+ | MM141573482 | ● |
| DCMT 11T302-WSF+ | MM141573483 | ● |
| DCMT 11T304-WSF+ | MM141573486 | ● |
| VCMT 110302-WSF+ | MM141573491 | ● |
| VCMT 110304-WSF+ | MM141573494 | ● |
| VCMT 160404-WSF+ | MM141573495 | ● |
| VCMT 160408-WSF+ | MM141573497 | ○ |
Turning steel pos finishing "M25" stainless — GTPM125
| Designation | Material No. | Available |
|---|---|---|
| CCMT 060204-WSF+ | MM11782037 | ● |
| CCMT 09T302-WSF+ | MM11782051 | ● |
| CCMT 09T304-WSF+ | MM11782052 | ● |
| CCMT 09T308-WSF+ | MM11782054 | ● |
| DCMT 070202-WSF+ | MM11782055 | ● |
| DCMT 070204-WSF+ | MM11782056 | ● |
| DCMT 11T302-WSF+ | MM11812678 | ● |
| DCMT 11T304-WSF+ | MM11782058 | ● |
| DCMT 11T308-WSF+ | MM11782059 | ● |
| TCMT 110202-WSF+ | MM11906411 | ● |
| VCMT 110302-WSF+ | MM11812682 | ● |
| VCMT 110304-WSF+ | MM11855134 | ● |
| VCMT 160404-WSF+ | MM11812684 | ● |
Cutting data — steel grades by workpiece material
Swipe to see more →
| Group | Type / alloy | Hardness HB | GTCP115 vc | GTCP125HP vc | GTCP125 vc | GTCP135 vc |
|---|---|---|---|---|---|---|
| P | Non-alloyed steel 0–0.45% C | 150–250 | 220–400 | 200–270 | 170–240 | 170–190 |
| P | Low-alloyed steel | 250–300 | 200–320 | 115–210 | 100–190 | 90–150 |
| P | High-alloyed steel | 200 | 180–320 | 150–240 | 130–210 | 120–200 |
| P | Corrosion-resistant steel | 200 | 200–320 | 150–240 | 130–210 | 140–180 |
| M | Ferritic stainless | 200 | 220–320 | 160–240 | 140–210 | 140–200 |
| M | Austenitic stainless | 180 | – | 115–240 | 100–210 | 110–190 |
| M | Duplex stainless | 230–260 | – | – | – | 80–150 |
| M | Martensitic stainless | 330 | – | 80–115 | 70–100 | 55–75 |
| K | Grey cast iron | 180 | 140–370 | 150–240 | 130–210 | – |
| K | Spheroidal cast iron | 160 | 190–430 | 140–270 | 120–240 | – |
| K | Malleable/tempered iron | 130 | 180–520 | 170–290 | 150–250 | – |
Stainless-grade columns (GTCM120HP / GTPM125): non-alloyed steel 150–250, GTCM120HP 150–250, GTPM125 130–250; austenitic stainless 180, 140–220, 100–220; martensitic stainless 330, 40–100, 40–100.