Indexable Milling – Shoulder Milling
Fire hjørnefræsesystemer — SSM-UA (2 skær), SSM-T (3 eller 4 skær) og DSM-L dobbeltsidet (4 skær) — 90° præcisionsfræsning.
Fire systemer, én hjørnefræsningsfamilie.
SSM-UA (2×90°) bruger APKT/APHT skær med 2 effektive skærkanter på tværs af otte anvendelser — planfræsning, notfræsning, periferifræsning, aksial dykfræsning, hjørnefræsning, spiralfræsning, lommefræsning og spiralfræsning. SSM-T går op til 3 skærkanter (TOKX) eller 4 skærkanter (SDKT/SDHT) for højere præcision og lavere omkostninger pr. skærkant — op til 35 % billigere pr. skærkant end APKT10. DSM-L fordobler værktøjslevetiden igen med vendbare LNKU/LOKU skær til 4 skærkanter pr. side.
Spånbryderkvaliteterne spænder over HCM (stål), SCM (rustfrit stål), CCM (støbejern), LMM (aluminium), RCM (specifik radius) og XCM (eksotisk/titanium) i belægningerne GTCP230, GTPP235, GTPM240, GTCK215, GTWN715, GTC5235 og GTC5240.
SSM-T — SDKT/SDHT inserts, 4×90°, 4 cutting edges
SSM-T — Shoulder Milling 4×90°
SDKT/SDHT inserts, 4 effective cutting edges. Up to 35% cost reduction per cutting edge compared to APKT10.
Chipbreakers: HCM — steel. SCM — stainless steel, exotic (secondary), titanium (secondary). CCM — cast iron. LMM — aluminium.
SDKT09
Swipe to see more →
| Designation | Chipbreaker | Material No. | Available |
|---|---|---|---|
| SDKT 09T308SR-HCM GTCP230 | HCM | MM11979028 | ● |
| SDKT 09T308SR-HCM GTPP235 | HCM | MM11979030 | ● |
| SDKT 09T308SR-SCM GTPM240 | SCM | MM11979032 | ● |
| SDKT 09T308SR-SCM GTC5235 | SCM | MM11584645 | ● |
| SDKT 09T308SR-SCM GTC5240 | SCM | MM11710895 | ● |
| SDKT 09T308SR-CCM GTCK215 | CCM | MM12193340 | ● |
| SDHT 09T308FR-LMM GTWN715 | LMM | MM14652621 | ● |
SDKT09 bodies
Swipe to see more →
| Designation | ø Milling cutter [mm] | z | Material No. | Available |
|---|---|---|---|---|
| C-SSM-S09-25.R.03-B-32-88 | 25 | 3 | MM11596014 | ● |
| C-SSM-S09-32.R.04-B-40-100 | 32 | 4 | MM11596009 | ● |
| G-SSM-S09-25.R.03 | 25 | 3 | MM12272435 | ○ |
| G-SSM-S09-32.R.04 | 32 | 4 | MM12272436 | ○ |
| A-SSM-S09-40.R.05 | 40 | 5 | MM11596010 | ● |
| A-SSM-S09-50.R.06 | 50 | 6 | MM11584233 | ● |
| A-SSM-S09-63.R.07 | 63 | 7 | MM11596011 | ● |
| A-SSM-S09-80.R.09 | 80 | 9 | MM11596013 | ● |
Cutting data — SDKT09
Swipe to see more →
| Group | Material | Chipbreaker | Grades | vc [m/min] | fz [mm] | ap [mm] |
|---|---|---|---|---|---|---|
| P | Steel | HCM | GTCP230, GTPP235 | 220–60 | 0.12–0.3 | 8–0.05 |
| M | Stainless steel | SCM | GTPM240, GTC5235 | 200–60 | 0.08–0.2 | 8–0.05 |
| K | Cast iron | CCM | GTCK215 | 320–100 | 0.1–0.25 | 8–0.05 |
| N | Non-ferrous | LMM | GTWN715 | < 2000 | 0.15–0.35 | 8–0.05 |
| S | Heat-resistant / titanium | SCM | GTC5235, GTC5240 | 75–25 | 0.04–0.15 | 8–0.05 |
Spare parts
Swipe to see more →
| Designation | Torque [Nm] | Material No. | Available |
|---|---|---|---|
| M3.0×7.3 – T08 | 1.2 | MM77613 | ● |
| Power screw M8.0×30.0 (only for A-SSM-S09-40.R.05) | 15 | MM1036880 | ● |
SDKT12
Swipe to see more →
| Designation | Chipbreaker | Material No. | Available |
|---|---|---|---|
| SDKT 120508SR-HCM GTCP230 | HCM | MM12154549 | ● |
| SDKT 120508SR-HCM GTPP235 | HCM | MM12062538 | ● |
| SDKT 120508SR-SCM GTPM240 | SCM | MM12074525 | ● |
| SDKT 120508SR-SCM GTC5235 | SCM | MM12067263 | ● |
| SDKT 120508SR-SCM GTC5240 | SCM | MM12071921 | ● |
| SDKT 120508SR-CCM GTCK215 | CCM | MM12154553 | ● |
| SDHT 120508FR-LMM GTWN715 | LMM | MM14652623 | ● |
SDKT12 bodies
Swipe to see more →
| Designation | ø Milling cutter [mm] | z | Material No. | Available |
|---|---|---|---|---|
| C-SSM-S12-32.R.03-B-40-100 | 32 | 3 | MM12138258 | ● |
| A-SSM-S12-40.R.04 | 40 | 4 | MM11965069 | ● |
| A-SSM-S12-50.R.05 | 50 | 5 | MM11981629 | ● |
| A-SSM-S12-63.R.06 | 63 | 6 | MM12060728 | ● |
| A-SSM-S12-80.R.07 | 80 | 7 | MM12060727 | ● |
Cutting data — SDKT12
Swipe to see more →
| Group | Material | Chipbreaker | Grades | vc [m/min] | fz [mm] | ap [mm] |
|---|---|---|---|---|---|---|
| P | Steel | HCM | GTCP230, GTPP235 | 220–60 | 0.12–0.3 | 10–0.1 |
| M | Stainless steel | SCM | GTPM240, GTC5235 | 200–60 | 0.08–0.2 | 10–0.1 |
| K | Cast iron | CCM | GTCK215 | 320–100 | 0.1–0.25 | 10–0.1 |
| N | Non-ferrous | LMM | GTWN715 | < 2000 | 0.15–0.35 | 10–0.1 |
| S | Heat-resistant / titanium | SCM | GTC5235, GTC5240 | 75–25 | 0.04–0.15 | 10–0.1 |
Spare parts
Swipe to see more →
| Designation | Torque [Nm] | Material No. | Available |
|---|---|---|---|
| M4.0×8.5 – T15 (only for ø32) | 5 | MM11037484 | ● |
| M4.0×11 – T15+ | 5 | MM1345432 | ● |
| Power screw M8.0×30.0 (only for A-SSM-S12-40.R.04) | 15 | MM11036880 | ● |