Indexable Milling – Face Milling
Tre planfræsningssystemer — SSM-H (6×45°), DSM-S (8×45°) og DSM-H (12×45°) — op til 12 effektive skærkanter.
Tre planfræsningssystemer, én familie.
SSM-H (6×45°) dækker universal HPKT/HPCT og ottekantede HOKT/HOCT skær. DSM-S (8×45°) bruger det dobbeltsidede, vendbare SOKU skær til 8 effektive skærkanter. DSM-H (12×45°) bruger HNKU/HOKU skær til 12 skærkanter og maksimeret økonomi.
Alle tre deler Masterfinish geometri for en ekstremt blød, spindelvenlig skæring med direkte skærindeksering, der ikke kræver fjernelse af spændeskruen. Fræserkroppe spænder over Ø40–160 mm.
Kvaliteterne dækker hele spektret — generelt stål (GCP230, GPP235), rustfrit stål (GC5235, GPM240), støbejern (GCK215, GPK220) og ikke-jernholdige metaller (GTWN715) — så én familie håndterer næsten alle planfræsningsopgaver.
SSM-H 6×45° — HPKT/HPCT general-purpose & HOKT/HOCT octagon inserts
SSM-H — Face Milling 6×45°
Masterfinish geometry, 6 effective cutting edges. HPKT/HPCT for general use, HOKT/HOCT (octagon) for extra edges.
Applications: Face milling, slot milling, chamfering.
Chipbreakers: HCM — steel, cast iron (secondary). SCM — stainless steel, exotic alloys (secondary), titanium (secondary). LMM — aluminium and non-ferrous metals (HPKT/HPCT only).
Indexing without full clamping-screw removal saves set-up time.
HPKT / HPCT inserts
Swipe to see more →
| Designation | Chipbreaker | Material No. | Available |
|---|---|---|---|
| HPKT 0604AZER-HCM GTCP230 | HCM | MM12193366 | ● |
| HPKT 0604AZER-HCM GTPP235 | HCM | MM12193369 | ● |
| HPKT 0604AZER-SCM GTC5235 | SCM | MM11526389 | ● |
| HPCT 0604AZER-LMM GTWN715 | LMM | MM14652610 | ● |
Cutting data
Swipe to see more →
| Group | Material | Chipbreaker | Grades | vc [m/min] | fz [mm] | ap [mm] |
|---|---|---|---|---|---|---|
| P | Steel | HCM | GCP230, GPP235 | 220–60 | 0.12–0.3 | 4–0.3 |
| M | Stainless steel | SCM | GC5235 | 200–60 | 0.1–0.25 | 4–0.3 |
| N | Non-ferrous | LMM | GWN715 | < 2000 | 0.05–0.35 | 4–0.3 |
HOKT / HOCT inserts (octagon)
Swipe to see more →
| Designation | Chipbreaker | Material No. | Available |
|---|---|---|---|
| HOKT 0604AZER-HCM GTCP230 | HCM | MM11950674 | ● |
| HOKT 0604AZER-HCM GTPP235 | HCM | MM11943817 | ● |
| HOCT 0604AZER-SCM GTPM240 | SCM | MM14652624 | ● |
| HOCT 0604AZER-SCM GTC5235 | SCM | MM12212264 | ● |
Cutting data
Swipe to see more →
| Group | Material | Chipbreaker | Grades | vc [m/min] | fz [mm] | ap [mm] |
|---|---|---|---|---|---|---|
| P | Steel | HCM | GCP230, GPP235 | 220–60 | 0.1–0.3 | 4–0.3 |
| M | Stainless steel | SCM | GPM240, GC5235 | 200–60 | 0.1–0.25 | 4–0.3 |
Bodies (shared by both insert types)
Swipe to see more →
| Designation | ø Milling cutter [mm] | z | Material No. | Available |
|---|---|---|---|---|
| C-SSM-H06-40.R.04-B32-50-110 | 40 | 4 | MM11520454 | ● |
| A-SSM-H06-40.R.04 | 40 | 4 | MM11520455 | ● |
| A-SSM-H06-50.R.05 | 50 | 5 | MM11520456 | ● |
| A-SSM-H06-63.R.06 | 63 | 6 | MM11520457 | ● |
| A-SSM-H06-80.R.07 | 80 | 7 | MM11520458 | ● |
| A-SSM-H06-100.R.09 | 100 | 9 | MM11520459 | ● |
| A-SSM-H06-125.R.10 | 125 | 10 | MM11520460 | ● |
Spare parts
Swipe to see more →
| Designation | Torque [Nm] | Material No. | Available |
|---|---|---|---|
| M4.0 × 11 – T15+ | 5 | MM1345432 | ● |
| Power screw M8.0 × 30.0 (only for A-SSM-H06-40.R.04) | 15 | MM11036880 | ● |