JF — Cermet Finishing
JF — Cermet Finishing
Fine finishing with cermet grade TCM10, 7°-inclusive geometry.
Example: DCMT 11T304-JF. Depth of cut 0.10–1.65 mm, feed 0.20–0.05 mm. Rated for consistent cutting depth only — not for inconsistent or interrupted cuts.
Swipe to see more →
| Designation | Chipbreaker | Material No. | Available |
|---|---|---|---|
| CCMT 060204-JF TCM10 | …-JF | MM11619142 | ● |
| CCMT 09T304-JF TCM10 | …-JF | MM11619132 | ● |
| DCMT 070204-JF TCM10 | …-JF | MM11619127 | ● |
| DCMT 11T304-JF TCM10 | …-JF | MM11619131 | ● |
| TCGT 110202-JF TCM10 | …-JF | MM11622263 | ● |
| TCMT 110204-JF TCM10 | …-JF | MM11619126 | ● |
| WCGT 020102-JF TCM10 | …-JF | MM11619140 | ● |
Cutting data — general cutting parameters by workpiece material
Swipe to see more →
| Group | Type / alloy | Hardness HB | TCM10 vc [m/min] |
|---|---|---|---|
| P | Non-alloyed steel 0–0.45% C | 150–250 | 230–270 |
| P | Low-alloyed steel | 250–300 | 180–230 |
| P | High-alloyed steel | 200 | 160–200 |
| P | Corrosion-resistant steel | 200 | 230–270 |
| M | Ferritic stainless | 200 | 170–240 |
| M | Austenitic stainless | 180 | 200–240 |
| M | Duplex stainless | 230–260 | – |
| M | Martensitic stainless | 330 | 130–160 |
| K | Grey cast iron | 180 | – |
| K | Spheroidal cast iron | 160 | 220–300 |
| K | Malleable/tempered iron | 130 | 250–350 |