Multicut — Especificaciones completas
General Overview
The complete programme from Ø 8–32 mm with cutting depths of 1.5D and 2.25D.
| Application | Description |
|---|---|
| XPNT inserts (general) | Ø 8.00–32.00 mm range |
| XPET inserts (aluminium) | Polished — grinded |
| Holders, 1.5×D cutting depth | Ø 8.00–32.00 mm |
| Holders, 2.25×D cutting depth | Ø 8.00–32.00 mm |
| Spare parts | Screws, extractors |
Designation System
Insert: XPNT 13 04 04 EN
- X — Insert shape
- P — Tolerances
- N — Clearance angle
- T — Form of top surface
- 13 — Cutting edge length
- 04 — Insert thickness
- 04 — Corner radius
- E — Cutting edge
- N — Cutting direction
Holder: MC 14 R-1.5D-07
- MC — MultiCut system
- 14 — Nominal diameter [mm]
- R — Cutting direction
- 1.5D — Maximum drilling depth
- 07 — Insert size
XPNT Inserts
General-purpose inserts. Coating grades: GTCP425, GTPP430, GTCP435 (main application: P/K steel & cast iron, extended: M/N/S).
Swipe to see more →
| Designation | d [mm] | l [mm] | s [mm] | r [mm] | d₁ [mm] |
|---|---|---|---|---|---|
| XPNT 040204EL | 4.5 | 4 | 1.8 | 0.4 | 2.1 |
| XPNT 040204ER | 4.5 | 4 | 1.8 | 0.4 | 2.1 |
| XPNT 050204EN | 5.8 | 5 | 2.1 | 0.4 | 2.25 |
| XPNT 060204EN | 6.5 | 6 | 2.92 | 0.4 | 2.5 |
| XPNT 070304EN | 7.6 | 7 | 3.87 | 0.4 | 2.8 |
| XPNT 080304EN | 8.5 | 8 | 3.87 | 0.4 | 3.4 |
| XPNT 090404EN | 9.6 | 9 | 4.66 | 0.4 | 3.4 |
| XPNT 100404EN | 10.6 | 10 | 4.66 | 0.4 | 4.4 |
| XPNT 100408EN | 10.6 | 10 | 4.66 | 0.8 | 4.4 |
| XPNT 130504EN | 13.5 | 12.5 | 5.45 | 0.4 | 5.3 |
| XPNT 130508EN | 13.5 | 12.5 | 5.45 | 0.8 | 5.3 |
| XPNT 170608EN | 17.5 | 16 | 6.25 | 0.8 | 5.3 |
XPET Inserts for Aluminium
Polished — grinded. Coating grade: GTWN715 (main application: N non-ferrous metals).
Swipe to see more →
| Designation | d [mm] | l [mm] | s [mm] | r [mm] | d₁ [mm] |
|---|---|---|---|---|---|
| XPET 050204FN | 5.8 | 5 | 2.1 | 0.4 | 2.25 |
| XPET 060204FN | 6.5 | 6 | 2.92 | 0.4 | 2.5 |
| XPET 070304FN | 7.6 | 7 | 3.87 | 0.4 | 2.8 |
| XPET 080304FN | 8.5 | 8 | 3.87 | 0.4 | 3.4 |
| XPET 090404FN | 9.6 | 9 | 4.66 | 0.4 | 3.4 |
| XPET 100404FN | 10.6 | 10 | 4.66 | 0.4 | 4.4 |
| XPET 130504FN | 13.5 | 12.5 | 5.45 | 0.4 | 5.3 |
| XPET 170608FN | 17.5 | 16 | 6.25 | 0.8 | 5.3 |
Drilling Depth up to 1.5×D
Available range for XPNT and XPET inserts.
Swipe to see more →
| D [mm] | Holder | dₐ [mm] | l₁ [mm] | l₂ [mm] | f [mm] | Insert |
|---|---|---|---|---|---|---|
| 8.00 | MC 08R/L-1.5D 04* | 12 | 80 | 12 | 4 | XPNT 0402 |
| 10.00 | MC 10R/L-1.5D 05 | 12 | 90 | 15 | 5 | XP…T 0502 |
| 12.00 | MC 12R/L-1.5D 06 | 16 | 100 | 18 | 6 | XP…T 0602 |
| 14.00 | MC 14R/L-1.5D 07 | 16 | 110 | 21 | 7 | XP…T 0703 |
| 16.00 | MC 16R/L-1.5D 08 | 20 | 125 | 24 | 8 | XP…T 0803 |
| 18.00 | MC 18R/L-1.5D 09 | 25 | 135 | 27 | 9 | XP…T 0904 |
| 20.00 | MC 20R/L-1.5D 10 | 25 | 150 | 30 | 10 | XP…T 1004 |
| 25.00 | MC 25R/L-1.5D 13 | 32 | 180 | 37.5 | 12.5 | XP…T 1305 |
| 32.00 | MC 32R/L-1.5D 17 | 40 | 200 | 48 | 16 | XP…T 1706 |
* Right-hand holder → right-hand indexable insert. Left-hand holder → left-hand indexable insert.
Drilling Depth up to 2.25×D
Available range for XPNT and XPET inserts.
Swipe to see more →
| D [mm] | Holder | dₐ [mm] | d₂ [mm] | l₁ [mm] | l₂ [mm] | l₃ [mm] | f [mm] | Insert |
|---|---|---|---|---|---|---|---|---|
| 8.00 | MC 08R/L-2.25D 04* | 10 | 15 | 60 | 18 | 22 | 4 | XPNT 0402 |
| 10.00 | MC 10R/L-2.25D 05 | 12 | 18 | 69.5 | 22.5 | 27.5 | 5 | XP…T 0502 |
| 12.00 | MC 12R/L-2.25D 06 | 16 | 22 | 78 | 27 | 33 | 6 | XP…T 0602 |
| 14.00 | MC 14R/L-2.25D 07 | 16 | 23 | 83.5 | 31.5 | 38.5 | 7 | XP…T 0703 |
| 16.00 | MC 16R/L-2.25D 08 | 20 | 28 | 94 | 36 | 44 | 8 | XP…T 0803 |
| 18.00 | MC 18R/L-2.25D 09 | 25 | 36 | 109.5 | 40.5 | 53.5 | 9 | XP…T 0904 |
| 20.00 | MC 20R/L-2.25D 10 | 25 | 35 | 111 | 45 | 55 | 10 | XP…T 1004 |
| 25.00 | MC 25R/L-2.25D 13 | 32 | 44 | 129 | 56.5 | 69 | 12.5 | XP…T 1304 |
| 32.00 | MC 32R/L-2.25D 17 | 40 | 54 | 158 | 72 | 88 | 16 | XP…T 1706 |
* Right-hand holder → right-hand indexable insert. Left-hand holder → left-hand indexable insert.
Off-Centre Drilling
Thanks to the special design of the holder and the indexable inserts, off-centre drilling is possible.
Swipe to see more →
| Holder (solid carbide) | Nominal D [mm] | Bore Dₘᵢₙ [mm] | Bore Dₘₐₓ [mm] |
|---|---|---|---|
| MC 08 R/L…04 | 8 | 7.85 | 8.3 |
| MC 10 R/L…05 | 10 | 9.85 | 10.5 |
| MC 12 R/L…06 | 12 | 11.85 | 12.5 |
| MC 14 R/L…07 | 14 | 13.85 | 14.5 |
| MC 16 R/L…08 | 16 | 15.85 | 16.5 |
| MC 18 R/L…09 | 18 | 17.85 | 18.5 |
| MC 20 R/L…10 | 20 | 19.8 | 20.5 |
| MC 25 R/L…13 | 25 | 24.8 | 25.8 |
| MC 32 R/L…17 | 32 | 31.8 | 33 |
Application Notes
Mounting of the insert: for tools Ø 8 mm, right-hand or left-hand inserts are required. From Ø 10–32 mm, neutral inserts are applied.
Machining across the centre line: if the machine has insufficient movement across the centre line, the external diameter cannot be machined with the same tool — use a right-hand MultiCut tool instead.
Through hole: with through holes, a sharp-edged disk is created as the tool breaks out. Safety measures are necessary.
Chip booster / coolant pressure (EcoCut, 2.25D range): an innovative bidirectional coolant supply improves chip evacuation, with an additional backwards-directed coolant stream from the flute area. Minimum coolant pressure 1.5–3 bar (optimum 5–7 bar).
Insert Grades
Coated high-performance grades, covering ISO material groups P, M, K, N, and S.
GTCP425 (HC-P25 | HC-K30 | HC-M20)
Co 7.0%; mixed carbides 8.1%; WC balance. Grain size 1–2 μm. Hardness HV30 1450. Coating: CVD Ti(CN)₂O₃Al multi-layer. Wear-resistant solution for steel and cast iron under stable conditions with high cutting speed.
GTPP430 (HC-P30 | HC-M25 | HC-S25 | HC-K30 | HC-N25)
Co 9.0%; others 0.75%; WC balance. Grain size 0.85 μm. Hardness HV30 1590. Coating: PVD TiAlN. Universal high-performance grade for steel, austenitic steel, and heat-resistant alloys.
GTCP435 (HC-P35 | HC-K40 | HC-M30)
Co 9.6%; mixed carbides 7.8%; others 0.4%; WC balance. Grain size 1–2 μm. Hardness HV30 1400. Coating: CVD Ti(C,N) + Al₂O₃ multi-layer. Reliable choice for machining steel and cast iron under unstable conditions.
GTWN715 (HW-K15)
Co 6.0%; WC balance; other 0.20%. Grain size 0.8–1.3 μm. Hardness HV30 1650. Uncoated carbide grade for machining aluminium and other non-ferrous metals.
Cutting Data by Material
Recommended cutting speed vc [m/min] by ISO material group.
Swipe to see more →
| Group | Material | GTCP425 | GTPP430 | GTCP435 | GTWN715 |
|---|---|---|---|---|---|
| P | Non-alloyed steel (0–0.45% C) | 270–90 | 230–50 | 80–280 | – |
| P | Low-alloyed steel | 270–70 | 160–50 | 700–200 | – |
| P | High-alloyed steel | 170–60 | 150–50 | 600–180 | – |
| P | Corrosion-resistant steel | 200–90 | 180–50 | 800–200 | – |
| M | Stainless steel | 200–90 | 160–50 | 100–180 | – |
| K | Grey cast iron | 250–120 | 180–90 | 120–250 | – |
| K | Spheroidal cast iron | 250–110 | 180–90 | 110–250 | – |
| K | Malleable cast iron | 250–100 | 140–60 | 100–250 | – |
| N | Aluminium wrought alloys | – | 1800–70 | 80–2000 | 100–2250 |
| N | Aluminium cast alloys | – | 1350–70 | 80–1500 | 100–1250 |
| N | Copper / copper alloys | – | 360–70 | 80–400 | 100–600 |
| N | Non-metallic materials | – | 180–50 | 60–200 | 60–220 |
| S | Heat-resistant alloys | – | 80–20 | 10–50 | – |
| S | Titanium alloys | – | 90–30 | 30–120 | – |
Depth-of-cut / feed-rate curves and drilling-depth/feed-rate charts are graphical in the source catalogue rather than tabular — see the full PDF above for the exact curves per tool size.
Spare Parts
| Material No. | Type / Description | Key size |
|---|---|---|
| MM11206195 | 10002494 / TORX 08IP F | T08IP |
| MM1148748 | 10007404 / TORX 07IP F | T07IP |
| MM11843205 | 10014921 / TORX 06IP F | T06IP |
| MM11843208 | 10014922 / TORX 09IP F | T09IP |
| MM11450858 | 10006919 / TORX 15IP (extractor) | T15IP |
| MM11816974 | 10013909 / TORX 20IP (extractor) | T20IP |
Swipe to see more →
| Material No. | Type / Description | Length [mm] | Thread | Key size |
|---|---|---|---|---|
| MM11227305 | M3.0×7.0-09IP / 10003007 | 7 | M3.0 | T09IP |
| MM11610311 | M3.5×8.6-15IP / 1000749 | 8.6 | M3.5 | T15IP |
| MM11684214 | M2.2×5.0-07IP / 10009244 | 5 | M2.2 | T07IP |
| MM11684216 | M2.5×6.0-08IP / 10009243 | 6 | M2.5 | T08IP |
| MM11801441 | M4.5×10.5-20IP / 10013040 | 10.5 | M4.5 | T20IP |
| MM11807480 | M2.0×4.3-06IP / 10013332 | 4.3 | M2.0 | T06IP |
| MM11807484 | M1.8×3.6-06IP / 10013338 | 3.6 | M1.8 | T06IP |